Can you accept creasing clothes on your body?

It is an acknowledged fact that cotton garments ensure maximum comfort thanks to their suppleness and their capacity to absorb humidity. The weak point of cotton clothing is its tendency to crease easily, which makes care of such garments more difficult. The tendency to crease is due to partially amorphous structure of the cellulose, which means that structural alterations can quite easily occur. Many weak molecular bonds such as hydrogen or Van Der Waals forces, which link together long cellulose polymer chains, can alter.

In order to limit creasing, T-LF h/c resin can be used which creates stronger (covalent) and more permanent bonds and reduce creasing to a large extent. This product can be used in conjunction with some other resins, polyethylene emulsions and silicone softeners.

Description:

T-LF h/c easycare resin is designed for low formaldehyde easycare finishing of textile materials composed of cellulosic fibres alone and in blends with synthetics. The level of formaldehyde is controlled under 75ppm.

Chemicals composition:
Modified N-dimethyloldroxyethylene urea
Characteristic:
Appearance	: Yellowish liquid
pH value	: 6.0-7.0
Density 20°C	: Around 1.2g/cm3
Reactivity	: Excellent
Solubility	: Soluble with cold water at any ratio
Storage	: 12 months shelf-life stored in unopened container at the condition 50C - 300C.
Compatibility	: Apply simultaneously with almost others resin finishing auxiliaries.   It is recommended to have small test before production,   specially anti-slip agent and water-proof agent.

Application:

Range & effect:
Cellulose fibre, rayon and its blends or knitted fabric after lowest formaldehyde resin finishing process will obtain easycare effect and meet to the no formaldehyde requirement of Oeko-Tek Standard before scouring. According to LAW112 and AATCC112, Easycare Resin T-LF contained free formaldehyde under 75 ppm is applied by padding at room temperature and liquid pick-up rate 60-90%.

Dosage:

Catalyst: Most suitable used at this method. Dosage is 20% of resin, not less than 13 g/L but not higher than 50 g/L.

Suggested prescription:

Sark surface fabric	(Knitted cotton)
25-50 g/L	T-LF h/c
13-16 g/L	Catalyst CS-200
20-50 g/L	Silicone Softener (T-V series)
Liquor rate:	Around 70%
Normal dry
Bake dry	150°C x 3 mins
Shirt surface fabric	(Knitted rayon)
40-60 g/L	T-LF h/c
13-18 g/L	Catalyst CS-200
20-30 g/L	Softener (T-G series)
15-30 g/L	Silicone Softener (T-V series)
Liquor pick up rate	Around 80%
Normal dry
Bake dry	170-175°C x 1min
Knitted outerwear	(Cotton)
20-35 g/L	T-LF h/c
13 g/L	Catalyst CS-200
20-50 g/L	Silicone Softener (T-V series)
Liquor pick up rate	Around 70%
Normal dry
Bake dry	170°C x 30sec.
Trouser fabric	(Knitted cotton, bake-dry)
25-40 g/L	T-LF h/c
13 g/L	Catalyst CS-200
20-50 g/L	Silicone Softener (T-V series)
Liquor pick up rate	Around 70%
Normal dry
Residual moisture regain rate	Around 10%
Garment made
Cut, trim, sew, steam for 10 second, Pad iron (160°C x 20second)
Absorb extra-steam. Depends on equipment, 150°C, bake dry 3-10 min

Package: 130kg/Drum